Skip to Content
Hardware / Sensors / Temperature & Humidity

Temperature and humidity sensors

Measure temperature, humidity, dew point and liquid temperature in production areas, cold rooms and control panels.

BannerBanner S15S-TH-MQ
Temperature & humidity sensor

S15S-TH-MQ

Compact M12 sensor for temperature and relative humidity; dew point is also available in its Modbus registers. RS-485 Modbus RTU output.

Humidity
0–100% RH, ±2% at 25 °C (±3% at 0–70 °C, 10–90% RH)
Temperature
–40 to +85 °C measuring range; ±0.7 °C at 0–60 °C
Output / protocol
RS-485, Modbus RTU (registers include temperature, humidity and dew point)
Supply voltage
10–30 V DC (4.5 mA active comms at 30 V)
Connector / rating
Integral 4-pin M12 male/female QD; IP65/IP67/IP68 at M12 connection
BannerBanner S24AS-D-MQP
Compressed-air dew point sensor

S24AS-D-MQP

Fits compressed-air lines with a 1/2" NPT thread, 316L stainless body. Tracks air dryness after the dryer and sends readings over RS-485 Modbus RTU.

Dew point
–116 to +85 °C, resolution 0.1 °C; accuracy ±4.5 °C (20–90% RH), ±7 °C (10–20% RH)
Also measures
Humidity 0–100% RH and temperature –40 to +85 °C
Output / protocol
RS-485, Modbus RTU
Supply voltage
10–30 V DC
Process connection / housing
1/2" male NPT, 316L stainless steel; 12-inch cable with 4-pin M12 QD; IP65/IP67/IP68 at M12
eYceYc THM80X Series
Industrial temperature & humidity transmitter

THM80X Series

Wall, duct and remote-probe versions, the remote probe reaching 200 °C. Two-line LCD, output selectable as 4–20 mA, 0–10 V or RS-485.

Measuring range
−40 to +200 °C; 0–100 %RH (probe: wall −40…80 °C, duct −40…120 °C, remote −40…200 °C)
Accuracy
Temperature ±0.1 °C; humidity ±1.2 %RH (0–90 %RH), ±2 %RH (90–100 %RH)
Outputs
4–20 mA / 0–10 V / RS-485
Supply
DC 24 V ±10 %, 60 mA
Protection / housing
Housing IP65 (probe IP20); aluminium housing, stainless-steel probe rated 10 bar
 MI-Air-TH-DIS
Temperature & humidity sensor with display

MI-Air-TH-DIS

LED display shows temperature and humidity at the installation point, while RS-485 sends readings to a monitoring system. Suits store rooms and general indoor areas.

Measuring range
−40 to 80 °C; 0–100 %RH (device label)
Output
RS485 (label: yellow 485A, blue 485B)
Display
Red LED digital-tube display (label: 'RS485 digital-tube type temperature & humidity')
Water / liquid temperature probe

MI-Water-Temp485

Temperature probe for water and liquids such as tanks and cooling systems, with RS-485 output. Ask our team for range and accuracy details.

Output
RS485 (label wiring V+, V−, 485A, 485B); seller title says Modbus
Specifications from the manufacturer

Can't find the model you need?

Tell us what you need to measure or connect, and our team will help choose a model that works with your existing system.

Contact options Hide contact options